Today I am excited to share the fun I had Creating with the Stamperia Tunnel Pop-up Card Kit. These kits allow you to create stunning layered pop-up cards without all the fussy cutting! All the pieces are precut - just punch them out and glue your card together. The kits are even easy to add your own personal touches. Here is a close up of my card.
Supplies needed include
Stamperia Tunnel Pop up kit - Voyages Fantastiques
Optional items to personalize your card - jute, ink
A Few Hints and Suggestions before you start
The pieces of each card kit are numbered. The numbers are a guide of sorts and not necessarily the “rule”. Each Card Kit also has a QR code that you can scan with your phone. It will lead you to Stamperia’s website to watch a video of Creating with Stamperia Tunnel Pop-up Card Kit. I recommend you either watch the video or if you are unable to watch the video, please see the step by step instructions below.
Creating with Stamperia Tunnel Pop-up Card
Create your Card base by punching out Piece #17 and folding in half.
Working on the front of the card punch out Pieces 19-28.
Glue Piece 19 to front of the card, adhering only the top and bottom of the piece to create a pocket.
If you want to personalize a bit here you can ink the edges of your pieces before adhering!
Adhere balloon silhouette piece to front of your Stamperia card.
Adhere wings and sentiments. Punch out tags and tuck into pocket.
If you want to personalize your Stamperia tags you can add jute bows.
Creating the Inside of your card
Punch out your four (4) Card windows.
Score each window 1 cm from the right and left edges.
This is what will create the dimension in your card.
Decorate your windows according to pictures or as you desire. Feel free to cut some clocks or gears in half. You can see my close-ups below.
Assembling your Stamperia Card
The windows will be put together to the smallest window opening up to the largest.
Adhere the left side of smallest window to inside of card matching the window edge to the fold.
Secure the second window to the card base, matching edge to 1st window.
Adhere 3rd window to card.
Adhere your 4th window. You can see that each window is placed on top of the other.
Taking your last card from the Stamperia Kit, score at 4 cm from the left edge.
Fold at the score line.
Adhere the edge of the top window to the edge of your folded card.
Continue adhering other windows to your card as before.
Adhere remaining card edge to your card base.
Add any remaining punch outs to your card as desired to finish off your card. I hope you enjoyed Creating with Stamperia’s Tunnel Pop-up Card kit and are inspired to try out these card kits.
No comments:
Post a Comment