Heritage Layout
Supplies:
Anthology Page
Ancestors Page
Lifetime Page
Roots Page
Keys Page
Ephemera
Chipboard Stickers
Buttons
Stickers
Rub-Ons
Jewels
Wood Shape
Tim Holtz Distress Ink in Gathered Twigs
Jute
Letter Stamp
Double
Sided Tape
Photo Sizes:
6.5” x 5”
4” x 4”
Tools:
Hot Glue Gun
Paper Cutter
Hole Punch
Scissors
For
this focal piece you can either use a wood shape or a chipboard piece. I chose
a wood piece. Grab the Tim Holtz Distress Ink in Gathered Twigs.
Smudge
the distress ink around the wood, heavier on the edges and lighter in the
center.
With
a stamp shape of your choice, stamp the full wood piece. Remember the ink will
spread in the wood grain, so the details will slightly get lost.
Cut
the Family word out of the Lifetime Page and grab the Camera Rub-On. I secured
these with ModPodge.
Set this aside to dry.
Now
to start the page. Find 2 pictures you love and cut them 6.5” x 5” and 4” x 4”.
Pull out the Anthology Page.
With
the Ancestors Page, mat the images. I secured mine with double sided tape.
Pull
out a string of Jute, and cut longer then the length of the page. Lay on the
left side of the page, and place embellishments as you like them.
Cut
this little piece out of the Keys Page. Spray with water, scrunch, and then rub
the Gathered Twigs Ink pad over it slightly. Give it a worn look. Set aside to
dry
Grab
your custom wood décor, Ephemera Ribbon, Chipboard Stickers and Buttons. Place them
at the bottom right side of the layout, under the images. Once you have them
laid out as you like, secure them with your hot glue gun.
In
the top left-hand corner, measure 1” in, and slightly down from the top. Punch
a small hole and thread the Jute through to the back. Secure the tail to the
back of the page with tape or glue.
Find
the ‘Story’ Chipboard Sticker, and stick it to the top of the left side of the
page, covering the hole where the Jute has gone through.
Grab this paper piece that
you had set aside to dry, some brown ink and a letter stamp. With a few sticker
and paper flags, secure those to the page under the Jute. Then, with double
sided tape, secure the paper piece, and stamp the letter on top of it.
Cut
out this “Love” from the Roots Page, and punch 2 small holes in it as shown in
the image. Thread the Jute through the holes and place it in the location you
prefer. Secure a paper flag under it, and then tape the “Love” piece down. I
added the Family Chipboard Sticker on top of them as well.
Thread
the Jute through the holes of the Leaf Chipboard Sticker and press into the
paper. With a hot glue gun, secure the flower to the page and add a Jewel to
the center. Add the Memories Chipboard Sticker below that and while the hot glue
gun is still hot, secure some colored buttons below.
Punch
a small hole at the bottom of the page, just as you did to the top. Thread the
Jute through and tape it down on the back of the page.
You can go back through the page and add jewels or other embellishments.
Your layout is now
finished!