Friday, June 20, 2014

Happy Birthday Card Tutorial

Happy Birthday Card Tutorial


Supplies:
3x4 Card
Decorative Tape
Chipboard Button
Mixed Bag Cut Out
Strips Sheet
Yellow Bakers Twine
Green & Gold Ink Pads
Rubber Stamps
Double Sided Tape
Glue Stick
Hot Glue

Tools:
Scissors
  
Find this watercolor 3x4 Card.
Using the Gold Dot Decorative Tape, stick a strip across the top of the Card.


Cut a 3” x ½” strip from the Strips Sheet. Cut a notch in one end.
 Using a gold, or dark yellow ink pad, ink the edges of the banner strip.
With small alphabet stamps and green ink, stamp ‘Birthday’ on the banner strip.


With a red marker, run it along the edges of the Happy Cut Out. I also added a few sporadic marker lines throughout the wood, just to give it some detail.


With double sided tape, stick this circle Gold Cut out in the bottom left corner.
Stick the banner strip on top of the Gold Circle, along the bottom of the Card.


With a glue stick, smear glue on the back of the Happy Cut Out and stick it to the Card, at an upward angle.


Grab some yellow bakers twine. Wrap it back and forth a couple times.
Tie a knot in the center.
 Cut the ends.
I made this about 2” wide, finished.


Stick the Red Chipboard Button in the center of the Gold Circle.
With some hot glue, stick the bakers twine knot in the center of the button.


Here is your finished Happy Birthday Card! 



2 comments: